PRODUCTS: PCB Cleaning Solvents (MicroCare)
1. Nonflammable Circuit Cleaners
   
Power Clean (PW2)
MCC-PW210A 10.5 0z/300g Aerosol :

It has been specifically formulated to rinse away lead-free residues, oils, inks and some conformal coatings without causing white residues. Based on nonflammable, fast-drying HFC solvents, most users find PowerClean ideal for defluxing SMT boards made with lead-free solders and pastes. It is perfect for light-duty degreasing, cleaning connectors, removing light oxides and cleaning flux-covered pallets.
• Super-strong defluxing
• Best on no-clean solders & lead-free pastes
• Prevents white residues from forming, and removes them
if they do
• Best benchtop replacement for HCFC-141b and HCFC-255
ozone-depleting solvents
• The most affordable cleaner in its class (nonflammable,
fast-drying, ozone-safe)


Summary Technical Data:
Cleaning Strength (Kb) 115
Specific Gravity (@25˚C) 1.27
Surface Tension (dyne/cm) 24
Toxicity Rating (ppm, 8-hr.,
TWA, PEL)
See MSDS
Safety Rating Nonflammable
Flashpoint, per ASTM D 93 Cleaning Strength (Kb) 115
NFPA Health: 1; Fire: 0; Reactivity: 1
Ozone Impact Zero
VOC Content (g/L) 1,080
REACH and ELINCS Compliant Yes
RoHS and WEEE Compliant Yes
SNAP Approved Yes

2. Money Saving Defluxers
VeriClean (DC1)
An afforable, Versatile Cleaner, Safe for people
and the planet
MCC-DC1 10 0z/274g Aerosol :

This powerful defluxer serves double-duty as a medium-strenth degreaser. It works great on rosin-and "no-clean" fluxes and pastes; almost any oil or light grease, and many adhesives. It literally melts away "solventless" silicone-based conformal coatings, silicone oils, silicone residues and silicone adhesives quickly and safely. Ozone-safe, low GWP and with a very low VOC rating, this is considered by many to be the most "planet-friendly" choice among solvents.
• Great defluxer and light degreaser
• Superior toxicity ratings
• Almost no aroma. brisk drying
• Melts away many silicone-based conformal coatings

Summary Technical Data:
Cleaning Strength (Kb Value ) 17
Specific Gravity (@ 25˚C) 0.77
Surface Tension (dynes/cm) 16.3
Toxocity (ppm, 8-Hr. TWA, AEL) 200
Flashpoint (TCC) -4˚C / 24˚F
Safety Rating Flammable
NFPA Health: 1; Fire: 3; Reactivity: 0
Ozone Impact Zero
Non-Exempt Organic Content (g/L) 87
REACH and ELINCS Compliant Yes
RoHS and WEEE Compliant Yes
SNAP Approved Yes

3. ProClean
An Affordable cleaning choice for less demanding
applications
MCC-PRO 12 0z/340g Aerosol :

For years our best-selling product, this humble cleaner delivers surprisingly strong cleaning. A blend of three ultra-pure water-free alcohols, it is the strongest of the alcohol-based choices. it is safer than rubbing alcohol and an excellent choice on rosin and "no-clean" fluxes. Pleasant, mild aroma; good toxicity ratings. Medium drying. Mil-spec approved. Plastic-safe.

Select ProClean when working on military products, or when cost control is critical.
• Great on solder pastes, fluxes and fresh chip-bonder
• Economical slow drying
• Suitable for military work


Technical Data
Contents: 400ml at 20˚C
CARB: “Electronic Cleaner”
VOC Standard = 75
Flashpoint: 12˚C / 53˚F
O.D.P: Zero
NFPA Ratings:
Health=1, Fire=3, Reactivity=0

4. TidyPen (Label Remover)
MCC-PO1 (10 pcs in a box):
Another great cleaning toold from MicroCare. It uses a natural citrus solvent made from oranges, and packaged it in a sturdy, aluminum dispenser. It puts fast, convenient cleaning in your pocket-take them anywhere! Great for removing marking tags, paper labels, stickers, EPROM labels, bar codes, Kapton residues. Very cost-effective-a "must have" time-saver. Static-safe. Ozone-safe. Biodegradable.

5. Contact Cleaner-C
Nonflammable Rinse for circuits
MCC-CCC 10.5 0z/300g Aerosol :

This ozone-safe contact cleaner is nonflammable, non-conductive, plastic-safe and dries instantly with almost no aroma. It can be used safely on circuit boards, cable harneses, relays, keyboards and motors. A very mild cleaner, it is the most affordable choice in its class. Ozone-safe and 100% VOC-exempt.

Summary Technical Data :
Contents: 250 mL
Cleaning Strength (Kb ) 18
Specific Gravity (@ 25°C) 1.49
Surface Tension (dynes/cm) 17.0
Viscosity (cps) 0.63
Flashpoint (TCC) None
Safety Rating: Nonflammable
Ozone Impact: Zero
Non-exempt Organic Content* (g/L): 0
RoHS and WEEE Compliant: Yes
REACH Registration Compliant: Yes
SNAP Approved: Yes
NFPA Ratings: Health: 1; Fire: 0;
Reactivity: 1


6. Reflow oven Cleaner
Reflow Oven Cleaner is an aggressive, nonflammable, slow-drying solvent engineered specifically to remove baked-on fluxes from inside wave solder machines and reflow ovens. This cleaner becomes more active when heated, just as warm water cleans better than cold water. This means the Reflow Oven Cleaner can use the heat of the oven or wave solder machine to warm itself, thereby boosting its cleaning power so flux residues just slip away with little elbow grease. Since most reflow ovens are already warm, using that latent heat makes the cleaning process faster and the results better. When compared to flammable alcohol cleaners, Reflow Oven Cleaner slashes cleaning times 50% while improving results.It's amazing to see -- even the thickest, blackest, most ugly residues just melt away with almost no effort.

Summary Technical Data :
Appearance Colorless Clear Liquid
Aroma Slight, aromatic
Boiling Point >97˚ C / 208˚ F
Toxicity Rating None assigned
Flashpoint (TCC) None
Safety Rating Nonflammable
NFPA Ratings Health: 1; Fire: 0; Reactivity: 0
Ozone Impact Zero
VOC Content (g/L) 495
REACH and ELINCS Compliant Yes
RoHS and WEEE Compliant Yes


7. Money-Saving Cleaning Tools
a. Bench Mounting Kit :
This kit holds the Trigger Grip and a can securely at the workbench. One part (red arrow) keeps the can upright; the second piece (blue arrow) holds the Trigger Grip when not in use. This prevents damage to cans because unsecured cans may tip over and be damaged. MicroCare guarantees that cans used with the Trigger Grip and the Bench Mounting Kit will empty completely, so you get to use all the solvent you paid for. ESD-safe. Extermely durable.
Image
Package
Product SKU
Weight
Size
Bag
MCC-BK3
0.29 lbs.
1 BK/Bag
b. Trigger Grip :
Important benefits from every Trigger Grip
• Standardized cleaning processes, for ISO-9000 quality
• ESD-safe construction materials enhance static control
programs
• Ergonomic design, light weight minimizes operator fatigue
• Easy rinsing makes for better cleaning results
• Huge variety of solvents for different substrates,
contamination
• Customizable brush tips
• Controlled dispensing minimizes solvent waste, saves money
• 100% factory tested and unconditionally guaranteed


Image
Package
Product SKU
Weight
Size
One TriggerGrip in Plastic Shipping Bag
MCC-ESD
NaN lbs.
1 ESD/Bag, 10 Bags/Case
Or, One Trigger Grip with a Slo-Flo Brush in Shipping Bag
MCC-ESD2
NaN lbs.
1 ESD/Bag, 10 Bags/Case